If the converter is transparent, you’ll notice that it only fills about half to two-thirds full. And for more information on the various ways to fill a fountain pen, be sure to read our article on Fountain Pen Filling Systems Explained!

An ink converter allows the fountain pen to use bottled ink, rather than ink cartridges. Most pens draw ink through a breather hole at the base of the nib, so if that entire nib isn’t submerged, the pen won’t be able to draw ink. Twist the converter knob counterclockwise to lower the piston and expel air from the pen. This method will vary with the type of converter.Next open your bottle of fountain pen ink, if you haven't already. Most pens draw ink through a breather hole at the base of the nib, so if the entire nib isn’t submerged, the pen won’t be able to draw ink. Most reservoirs are either a piston converter, a cartridge or an ink bladder. A cartridge-converter is a fountain pen that takes a cartridge or a fountain pen converter, like Pilot’s CON-40. Your fountain pen consists of 4 parts when assembled—the cap, the nib, the barrel, and the ink reservoir. Dip the nib into the ink. Ink converters match the style of the cartridge the pen uses. Use a paper towel to clean the grip section and absorb any excess ink from the nib. Insert the converter into the pen’s grip section.

It’s fundamentally the same concept, but the push-button spring mechanism gives you less fine control of the fill.

The most common modern pens will require this step. Make sure the entire nib is submerged in ink so that the grip section is also touching the ink. Most pens draw ink through a breather hole at the base of the nib, so if that entire nib isn’t submerged, the pen won’t be able to draw ink. Insert the ink converter onto the back side of the grip section. All Rights Reserved. Copyright © 2020 Pen Chalet. Remember to keep your nib submersed during this entire process.Remove the pen from the nib and point the nib upwards. If you do not use your pen much, you may want to only partially fill the converter with ink, so that it does not dry out before you next use it. Cartridge-Converters. Screw off the barrel. How to Fill Your LAMY Fountain Pen with a Converter - YouTube You may notice that some air is still in the converter when the piston is fully raised. The cartridge is a self-contained, disposable unit filled with ink. Repeat steps 3 and 4 until air bubbles no longer come out of the pen during step 3. Push and release the button to expel air and draw in ink. Most cartridge/converter style pens will come with a converter included, and most are attached to the pen. To learn more and see some of our top recommended inks, check out our fountain pen ink guides. Some cartridge style fountain pens are proprietary and only allow for their brand of ink cartridge to be used. Insert the converter into the pen’s grip section. Older and rarer pens will have self-filling mechanisms that do not require removing the barrel. Only the techniques and tools whose performance we personally confirm make it into our guides as recommendations.Now that you know how to use a converter, the wide world of JetPens is accepting and shipping US orders. Simple and reliable, piston converters are by far the most common variety, made by virtually every manufacturer from Use a paper towel to clean the grip section and absorb any excess ink from the nib. That is normal. We then test every finding that makes it through the research stage.
Be careful to go slowly so you do not force the ink out as well.You may repeat the filling process if you would like to completely fill the converter, but it is not necessary. First, you must take the pen apart by unscrewing the grip section of the pen from the barrel.The next step, is to attach the ink converter to the pen.

Make sure the entire nib is submerged in ink so that the grip section is also touching the ink. Squeeze converters can consist of a simple exposed sac, like the Fill a Converter Style Fountain Pen Most fountain pens that use ink cartridges can also use an ink converter.

Repeat steps 3 and 4 until the converter is filled with ink or until air bubbles no longer come out of the pen during step 3. Slowly release the converter and wait several seconds for the converter to draw in ink. Most pens will use a standard international ink cartridge, but some brands have proprietary ink cartridges. Instead of a barrel cover, built-in piston or butt… Send an electronic gift certificate to a fellow pen junkie!Subscribe to our newsletter for giveaways and new products! Dip the nib into the ink. Dip the nib into the ink. Twist the converter knob clockwise to raise the piston and draw ink into the pen. Dip the nib into the ink bottle until the breather hole is completely immersed in the ink.Once the nib is submerged in the ink, it is time to fill the converter. Squeeze the sac or push-bar as firmly as you can to expel the air from the pen. You should notice air bubbles escaping from the pen as you do this. If the converter is not attached, you will need to attach it..

A converter is a device that attaches to a fountain pen, bringing the filling mechanism with it. Insert the converter into the pen’s grip section. Make sure you get the correct converter for your pen. Remember, ink is water base and will evaporate when left in a pen for an extended period of time. Use a paper towel to clean the grip section and absorb any excess ink from the nib. The ink converter will either press onto the pen using a compression fit, or some ink converters are threaded and must screw into the pen.Flush the air from the converter. Repeat until the converter is filled with ink or until air bubbles no longer come out of the pen when you push the button. This is the normal limit to how much ink squeeze converters can typically draw. See Learn how to fill your fountain pen with our easy to follow instructions. That's all there is to it. Squeeze converters are older than piston converters, but they’re much less common these days. Make sure the entire nib is submerged in ink so that the grip section is also touching the ink.
You should notice air bubbles escaping from the pen as you do this. We suggest you Reassemble your fountain pen and you’re done. The converter won’t draw much ink if you don’t push and release the button quickly enough, so be vigorous!